A multi-material part design framework in additive manufacturing

Additive manufacturing (AM) technologies provide more freedom to functional part design in various industries. One of the unique capabilities of AM is that multi-material parts can be produced with material compositional and geometric complexity. Multi-material parts have the advantage of achieving multiple performance requirements. In the research, we propose a framework for designing multi-material parts using AM processes. The proposed framework is composed of four interacting modules, including design requirement identification, primary material selection, AM process selection, material composition, and part geometry determination. Rules and guidelines for AM are integrated into the proposed framework with AM processes’ capabilities and constraints compiled in databases. We also introduce databases to assist in decision-making and ensure manufacturability of the designed multi-material part in various product design phases. The proposed framework is applied to a case study involving a conceptual design of a multi-material battery pack cooling plate.     

基于介形类生态特征评价湖南某铀矿山地表水放射性环境

湖南某铀矿为我国一重要铀资源生产基地，长年的矿冶活动使该铀矿冶地域生态环境不可避免地遭到了一定程度破坏。本文以该铀矿冶地域介形类为研究对象，分析其分布与生态特征，并利用该生物评价本矿冶地域地表水放射性污染状况。结果表明，Cypridopsis vidua在溪流与河流中均有分布，Helerocypris incongruens仅发现于河流，两者丰度均不高。利用该两种介形类丰度及总丰度变化可指示水体铀浓度的变化，丰度越小，铀含量越大，反之亦然。Shannon-Wiener物种多样性指数与水体铀浓度呈明显负相关，表明也可利用介形类生物指数指示水体铀浓度。该生物指数明显偏低，说明该铀矿冶地域地表水环境质量需要改善，放射性污染应引起足够重视。     

Fenton 絮凝工艺去除废水中的有机物试验

为了研究废水中有机物的去除问题，针对某企业含有机物废水进行了对比试验，采用了Fenton 絮凝联合工艺去除废水中的COD（化学需氧量）和浊度，考察了初始pH值、H2O2投加量、H2O2与Fe2+投加物质的量比、反应时间、絮凝剂投加量以及絮凝剂投加时的pH值对COD以及浊度去除效果的影响。结果表明，采用最佳工艺参数组合后，浊度去除率和COD的去除率分别为99.32%和97.27%。     

Fermatean fuzzy linguistic set and its application in multicriteria decision making

In this paper, we propose the concept of Fermatean fuzzy linguistic term sets based on linguistic term sets and Fermatean fuzzy sets. The basic operational laws, the score function, and the accuracy function of Fermatean fuzzy linguistic numbers are provided. Then we propose the Fermatean fuzzy linguistic weighted aggregation operator, the Fermatean fuzzy linguistic weighted geometric operator, and the Fermatean fuzzy linguistic distance measures. Furthermore, we extend the TOPSIS method to the proposed distance measures, and the ranking of alternatives is obtained under a Fermatean fuzzy linguistic environment. An example is provided to illustrate the feasibility and effectiveness of the proposed method, and a comparison with the existing method is also analyzed. Finally, the sensitivity analysis of the parameter in the proposed distance measure is also discussed.     

A general mechanistic model for predicting the fate and transport of phthalates in indoor environments

A mechanistic model that considers particle dynamics and their effects on surface emissions and sorptions was developed to predict the fate and transport of phthalates in indoor environments. A controlled case study was conducted in a test house to evaluate the model. The model‐predicted evolving concentrations of benzyl butyl phthalate in indoor air and settled dust and on interior surfaces are in good agreement with measurements. Sensitivity analysis was performed to quantify the effects of parameter uncertainties on model predictions. The model was then applied to a typical residential environment to investigate the fate of di‐2‐ethylhexyl phthalate (DEHP) and the factors that affect its transport. The predicted steady‐state DEHP concentrations were 0.14 μg/m³ in indoor air and ranged from 80 to 46 000 μg/g in settled dust on various surfaces, which are generally consistent with the measurements of previous studies in homes in different countries. An increase in the mass concentration of indoor particles may significantly enhance DEHP emission and its concentrations in air and on surfaces, whereas increasing ventilation has only a limited effect in reducing DEHP in indoor air. The influence of cleaning activities on reducing DEHP concentration in indoor air and on interior surfaces was quantified, and the results showed that DEHP exposure can be reduced by frequent and effective cleaning activities and the removal of existing sources, though it may take a relatively long period of time for the levels to drop significantly. Finally, the model was adjusted to identify the relative contributions of gaseous sorption and particulate‐bound deposition to the overall uptake of semi‐volatile organic compounds (SVOCs) by indoor surfaces as functions of time and the octanol‐air partition coefficient (K_oa) of the chemical. Overall, the model clarifies the mechanisms that govern the emission of phthalates and the subsequent interactions among air, suspended particles, settled dust, and interior surfaces. This model can be easily extended to incorporate additional indoor source materials/products, sorption surfaces, particle sources, and room spaces. It can also be modified to predict the fate and transport of other SVOCs, such as phthalate‐alternative plasticizers, flame retardants, and biocides, and serves to improve our understanding of human exposure to SVOCs in indoor environments.     

基于MATLAB的GPS周跳探测与修复

在GPS观测过程中,信号会受到遮挡等原因发生跳变现象,引起很大误差甚至是粗差,为了解决这一问题,文中利用MATLAB软件,根据电离层残差法和Melbourne-Wübbena组合法的优缺点,结合这两种方法进行GPS载波相位观测值的周跳探测,然后根据周跳探测结果进行修复,结果表明:利用组合方法编制的MATLAB周跳探测与修复的程序能很好的探测和修复GPS周跳.     

The effect of alkali metal oxide on the properties of borosilicate fireproof glass: Structure,thermal properties,viscosity, chemical stability

The purpose of the current work was to research the effect of alkali metal oxide on the structure, thermal properties, viscosity and chemical stability in the glass system (R₂O–CaO–B₂O₃–SiO₂) systematically. Because the glass would emulsify when Li₂O was added to the glass batch, this article did not discuss Li₂O. The results showed that when the amount of Na₂O was less than 4 mol.%, there was a higher interconnectivity of borate and silicate sub-networks in glass, as more mixed Si–O–B bonds were present in glass. The glass samples exhibited excellent thermal properties and chemical stabilities. As the amount of Na₂O exceeded 4 mol.%, the interconnectivity of borate and silicate sub-networks was weakened. The thermal properties and chemical stabilities of the glass samples were reduced. The connectivity of the silicate sub-network was weakened slightly as the Na/K ratio varied, and the coefficient of thermal expansion (CTE) of the glass samples gradually increased, and the resistance to thermal shock (RTS) value gradually decreased. Moreover, the viscosity of the glass samples decreased with the ratio of Na/Si and Na/K increased.     

Stabilization of natural gas foams using different surfactants at high pressure and high temperature conditions

Natural gas foam can be used for mobility control and channel blocking during natural gas injection for enhanced oil recovery, in which stable foams need to be used at high reservoir temperature, high pressure and high water salinity conditions in field applications. In this study, the performance of methane (CH₄) foams stabilized by different types of surfactants was tested using a high pressure and high temperature foam meter for surfactant screening and selection, including anionic surfactant (sodium dodecyl sulfate), non-anionic surfactant (alkyl polyglycoside), zwitterionic surfactant (dodecyl dimethyl betaine) and cationic surfactant (dodecyl trimethyl ammonium chloride), and the results show that CH₄-SDS foam has much better performance than that of the other three surfactants. The influences of gas types (CH₄, N₂, and CO₂), surfactant concentration, temperature (up to 110°C), pressure (up to 12.0 MPa), and the presence of polymers as foam stabilizer on foam performance was also evaluated using SDS surfactant. The experimental results show that the stability of CH₄ foam is better than that of CO₂ foam, while N₂ foam is the most stable, and CO₂ foam has the largest foam volume, which can be attributed to the strong interactions between CO₂ molecules with H₂O. The foaming ability and foam stability increase with the increase of the SDS concentration up to 1.0 wt% (0.035 mol/L), but a further increase of the surfactant concentration has a negative effect. The high temperature can greatly reduce the stability of CH₄-SDS foam, while the foaming ability and foam stability can be significantly enhanced at high pressure. The addition of a small amount of polyacrylamide as a foam stabilizer can significantly increase the viscosity of the bulk solution and improve the foam stability, and the higher the molecular weight of the polymer, the higher viscosity of the foam liquid film, the better foam performance.